What is a built-in nose bar

The built-in nose bar is a long, shapeable strip embedded above the mask, usually made of metal, plastic or silicone. It can be manually bent to fit the shape of the nose bridge, thus ensuring that the mask is close to the face when worn, reducing the possibility of air leakage from above.

The role and advantages of the nose bridge rod

Improve the fit of the mask

The built-in nose bridge rod makes the mask better cover the mouth and nose area by accurately fitting the curve of the nose bridge, reducing the direct contact of external air, and improving the overall sealing and protective effect.

Improved wearing comfort

Because the nose bridge rod can be adjusted, it can be fine-tuned according to the individual's facial contour, making the mask more fitting, reducing the discomfort of long-term wearing, and improving the wearing experience.

Enhanced protection

The effective design of the built-in nose bar can significantly reduce the risk of external pollutants (such as dust, pollen, bacteria) entering the respiratory tract through the gap above the mask, providing you with more comprehensive protection.

The working principle of the built-in nose bridge rod

The built-in nose bridge rod is physically bent to fit the shape of the nose bridge. When the wearer presses the nose bridge bar with his hand, it can be shaped to closely fit the nose contour, forming a sealed barrier that prevents air from leaking from above.

How to adjust the nose bridge correctly

Easy steps to adjust

1. First, put the mask on your face and make sure that the ear hook or strap under the mask is fixed.
2. Then, gently press the nose bridge rod with your fingers and shape it along the curve of the nose bridge until it fits completely.
3. Finally, check whether the mask fits the face and make sure there are no obvious gaps.

Notes and tips

When adjusting the nose bridge rod, do not use too much force to avoid damage to the mask. If you feel that the bridge of the nose is not soft enough, you can slightly heat it before wearing it (such as soaking in warm water for a few seconds), which is easier to shape.

Different types of nose bar

Metal Nose Bar

Metal nose bar is the most common type, with good shaping performance and durability. Suitable for most common masks.

Plastic nose bar

The plastic nose bar is relatively soft and suitable for people who are allergic to metal. Although the shaping ability is slightly weaker, it is more comfortable.

Silicone nose bar

The silicone nose bar is soft and comfortable to wear, especially for long periods of time. At the same time, the silicone material has certain antibacterial properties and is more hygienic.

Nose bridge bar for various nose types

Narrow nose type

Narrow nose type It is recommended to choose a thinner nose bridge rod to better fit the nose bridge curve.

Wide Nose

It is recommended to choose a thicker nose bridge rod for the wide nose type to ensure sufficient support and stability.

High bridge of nose

High nose bridge It is recommended to choose a longer nose bridge rod to completely cover the height of the nose bridge and improve sealing.

Low bridge of nose

Low nose bridge It is recommended to choose a shorter nose bridge rod to avoid excessive compression of the nose bridge and discomfort.

Daily care of built-in nose bar

Correct cleaning method

When cleaning the mask, first remove the nose bridge rod, gently scrub with mild detergent and water, then rinse with water, and finally dry. Be careful not to use high temperature water or strong rubbing, so as not to damage the nose bar.

Proper storage method